80812 tkim/42806 msim tb-00002274/d1504ea tsim tb-00000344/n3001 tsim ta-3372, 3373 no.7129-1/7 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 mch3109/mch3209 bipolar transistor (?) 30v, (?) 3a, low v ce ( sat ) , ( pnp ) npn single mcph3 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applicaitons ? relay drivers, lamp drivers, motor drivers, ash features ? adoption of mbit processes ? large current capacity ? low collector-to-emitter saturation voltage ? high-speed switching ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.85mm) ? high allowable power dissipation speci cations ( ) : mch3109 absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--30)40 v collector-to-emitter voltage v ceo (--)30 v emitter-to-base voltage v ebo (--)5 v collector current i c (--)3 a collector current (pulse) i cp (--)5 a base current i b (--)600 ma collector dissipation p c when mounted on ceramic substrate (600mm 2 0.8mm) 0.8 w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7019a-004 ordering number : EN7129C product & package information ? package : mcph3 ? jeita, jedec : sc-70, sot-323 ? minimum packing quantity : 3,000 pcs./reel packing type : tl marking electrical connection 1 : base 2 : emitter 3 : collector mcph3 0.25 0.25 0.07 2.1 1.6 2.0 0.65 0.3 0.85 0.15 12 3 0 to 0.02 aj lot no. lot no. cj lot no. lot no. mch3209 mch3109 tl 3 2 1 mch3209 3 2 1 mch3109 mch3109-tl-e mch3209-tl-e
mch3109 / mch3209 no.7129-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =(--)30v, i e =0a (--)0.1 a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)0.1 a dc current gain h fe v ce =(--)2v, i c =(--)500ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)500ma (380)450 mhz output capacitance cob v cb =(--)10v, f=1mhz (25)20 pf collector-to-emitter saturation voltage v ce (sat)1 i c =(--)1.5a, i b =(--)30ma (--155)120 (--230)180 mv v ce (sat)2 i c =(--)1.5a, i b =(--)75ma (--)105 (--)155 mv base-to-emitter saturation voltage v be (sat) i c =(--)1.5a, i b =(--)30ma (--)0.83 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 a, i e =0a (--30)40 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)30 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 a, i c =0a (--)5 v turn-on time t on see speci ed test circuit. (50)30 ns storage time t stg (270)300 ns fall time t f (25)15 ns switching time test circuit ordering information device package shipping memo mch3109-tl-e mcph3 3,000pcs./reel pb free mch3209-tl-e mcph3 3,000pcs./reel v r r b v cc =12v v be = --5v + + 50 input outpu t r l 100 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =500ma (for pnp, the polarit y is reversed.) i c -- v ce it03993 i b =0ma 0 0 200 400 600 800 0.4 0.8 1.2 1.6 2.0 1000 i c -- v ce it03994 -- 2ma --4ma --6ma -- 8ma -- 10ma -- 30ma -- 40ma -- 50ma -- 20ma 2ma 4ma 50ma 6ma 20ma 10ma 8ma 30ma 40ma 0 0 --200 --400 --600 --800 --0.4 --0.8 --1.2 --1.6 --2.0 --1000 mch3109 mch3209 i b =0ma collector-to-emitter voltage, v ce -- mv collector current, i c -- a collector-to-emitter voltage, v ce -- mv collector current, i c -- a
mch3109 / mch3209 no.7129-3/7 cob -- v cb 2 2 3 5 7 100 10 --1.0 23 57 --10 23 5 cob -- v cb it04001 it04002 it03997 it03999 it03998 it04000 2 10 3 5 7 2 3 5 7 100 1000 h fe -- i c h fe -- i c ta=75 c --25 c mch 3209 v ce =2v 25 c 100 2 3 5 7 1000 10 2 3 5 7 f t -- i c f t -- i c 23 57 --0.01 --0.1 23 57 --1.0 23 57 --10 23 57 --10 --100 23 57 --1000 23 2 3 5 7 100 2 3 5 7 1000 10 23 57 0.1 0.01 23 57 1.0 23 57 10 mch3109 v ce = --10v 100 2 3 5 7 1000 10 2 3 5 7 23 57 0.01 100 23 57 1000 23 mch3209 v ce =10v ta=75 c --25 c mch3109 v ce = --2v 25 c mch3109 f=1mhz 2 2 3 5 7 100 10 1.0 23 57 10 23 5 mch3209 f=1mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector-to-base voltage, v cb -- v output capacitance, cob -- pf dc current gain, h fe collector current, i c -- a dc current gain, h fe collector current, i c -- a gain-bandwidth product, f t -- mhz collector current, i c -- ma gain-bandwidth product, f t -- mhz collector current, i c -- ma 0 --0.2 --0.4 --0.6 --0.8 --1.2 --1.0 i c -- v be it03995 3.0 2.0 1.0 0 0 0.2 0.4 0.6 0.8 1.2 1.0 2.5 1.5 0.5 3.5 --3.0 --2.0 --1.0 0 --2.5 --1.5 --0.5 --3.5 i c -- v be it03996 ta=75 c 25 c --25 c ta=75 c 25 c --25 c mch3209 v ce =2v mch3109 v ce = --2v base-to-emitter voltage, v be -- v collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a
mch3109 / mch3209 no.7129-4/7 v ce (sat) -- i c --25 c mch3109 i c / i b =50 v ce (sat) -- i c mch3209 i c / i b =50 --25 c ta=75 c ta= --25 c it04005 it04006 v be (sat) -- i c v be (sat) -- i c it04007 it04008 7 5 3 2 --10 --1.0 7 5 3 2 --0.1 7 5 3 2 23 57 --0.1 --0.01 23 57 --0.1 --0.01 23 57 --1.0 23 57 --10 23 57 --1.0 23 57 --10 --0.01 7 5 3 2 10 1.0 7 5 3 2 0.1 7 5 3 2 23 57 0.1 0.01 23 57 1.0 23 57 10 0.01 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 23 57 0.1 0.01 23 57 1.0 23 57 10 10 7 5 3 2 1.0 7 5 3 2 0.1 25 c 25 c 25 c 75 c ta= --25 c 25 c 75 c ta=75 c mch3109 i c / i b =50 mch3209 i c / i b =50 0.1 23 57 1.0 23 57 10 23 5 0.1 1.0 2 3 5 7 0.01 2 3 5 7 10 2 3 5 7 a s o i c =3a i cp =5a 1ms it04010 dc operation 100ms 10ms 500 s 100 s collector current, i c -- a collector current, i c -- a collector current, i c -- a collector current, i c -- a collector current, i c -- a collector-to-emitter voltage, v ce -- v base-to-emitter saturation voltage, v be (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v mch3109 / mch3209 ta=25 c single pulse for pnp, minus sign is omitted. mounted on a ceramic board (600mm 2 ? 0.8mm) v ce (sat) -- i c --25 c mch3109 i c / i b =20 v ce (sat) -- i c mch3209 i c / i b =20 --25 c ta=75 c it04003 it04004 7 5 3 2 --1.0 --0.1 7 5 3 2 --0.01 7 5 3 2 23 57 --0.1 --0.01 23 57 --1.0 23 57 --10 --0.001 7 5 3 2 1.0 0.1 7 5 3 2 0.01 7 5 3 2 23 57 0.1 0.01 23 57 1.0 23 57 10 0.001 25 c 25 c ta=75 c collector current, i c -- a collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v 1.0 0 0.8 0.6 0.2 0.4 collector dissipation, p c -- w ambient temperature, ta -- c 20 060 40 80 100 140 120 160 p c -- ta it03981 mounted on a ceramic board (600mm 2 ? 0.8mm)
mch3109 / mch3209 no.7129-5/7 taping speci cation mch3109-tl-e, mch3209-tl-e
mch3109 / mch3209 no.7129-6/7 outline drawing land pattern example mch3109-tl-e, mch3209-tl-e mass (g) unit 0.007 * for reference mm unit: mm 0.65 0.65 0.4 2.1 0.6
mch3109 / mch3209 ps no.7129-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
